Every camera slot has a blue light indicator. It is very important not to remove the camera from the slot while the blue LED is on. When you put the camera into the slot the appropriate indicator should turn on and then turn off this indicates that the camera is ready to be used.

If the camera is returned with a recorded video the blue light on the docking station and the orange circle on the camera will be lit up until the video is successfully uploaded.

If the center of the camera is blinking yellow and the blue LED does not light up when you put the camera into the slot, the camera is not inserted correctly and must be removed and reinserted.

1. Green LED Indicator on the camera - Shows that the camera is currently charging.

2. In order to start recording with the camera. Remove the camera from the docking station. Long press the central button until the yellow light starts blinking.

1. Blinking Red/Yellow - If there is a problem with the camera the central circle will be blinking in red/yellow. The camera is not recording. In such cases try unplugging/plugging the SD card. If the issue persists contact us at [email protected].

2. If the camera is placed in the slot

The only difference with this camera type is the green LED on the right side that lights up when the camera is recording.

2. Indicates that the docking station is plugged in and has power.

3. Please note that the light indicator of the camera slot (shown in green) is different from the big blue LED light (shown in red) which indicates that the docking station is plugged in and has power.

----------------------------------------------------------------------------------------------------